TSUNAMI WATER SEPARATORS
SIMPLE. EFFICIENT. EFFECTIVE.
The Tsunami Water Separator is a high-quality filtration product that removes dirt, particulate, and water from compressed air systems. The Tsunami Water Separator uses a unique up-flow gravity separation process to remove water droplets and aerosols from the air before being discharged through an automatic drain.
- Point-of-use protection for air tools and pneumatic equipment
- Removes bulk liquids and water
- Filters particulate down to 10 micron at 99% efficiency
- Filters particulate down to 1 micron at 95% efficiency
Float Drain
STANDARD DRAIN
Contains a float within the device that normally seats on a small orifice. When liquid enters the drain the float rises off its seat, exposing the orifice and allowing liquid to discharge through the stem.
Pneumatic Drain
REQUIRES PILOT SIGNAL
A pneumatically actuated drain valve efficiently removes liquids from the filters using an intermittent pilot signal. Water separators, up to 120 CFM, use the filter drain with an internal reservoir (pictured above). Larger units, 225 CFM+, have a head-mounted pneumatic drain valve with an external reservoir.
Electronic Drain
REQUIRES ELECTRICITY
Incorporates a solenoid valve and an electric timer with two on/off settings. ON is the setting for the amount of time the valve needs to stay open (0.5 to 10 seconds) and OFF is the time between openings (0.5 to 45 minutes).
NOT A PURCHASIBLE ITEM
(Product Over Veiw Page)
