Oil Coalescing Filters 20-800 series

Oil Coalescing Filters 20-800 series

Tsunami

OIL COALESCING FILTERS

REMOVE OIL AEROSOLS AND FINE PARTICULATE

Tsunami oil coalescing filters deliver high grade compressed air and protect critical equipment from oil aerosols and particulates. Tsunami oil coalescing filters use a non-wicking drain layer secured to the outside support core to separate oil and water from the air flow and drain the liquid to the filter sump.

 

Features:
  • Manufactured from borosilicate glass micro fibers bonded together with a resin binder
  • Chemical-resistant cores and layers support coalescing media
  • Non-Wicking layer collects and drains oil into drain sump of the filter housing, preventing entrainment
  • Available with float, electronic, or pneumatic drain options
  • Available for systems with a flow rating from 20 to 800 CFM
  • Made in America

 

Benefits:
  • Point-of-use protection for air tools and pneumatic equipment
  • Larger elements provide more surface area to capture oils an particulates while minimizing pressure drop
  • Removes oil, oil mist and particulates down to .01 micron at 99.9% efficiency

 

DRAIN OPTIONS

Tsunami Oil Coalescing Filters come with one of the following drain options:

Float Drain

Float Drain

STANDARD DRAIN

Contains a float within the device that normally seats on a small orifice. When liquid enters the drain the float rises off its seat, exposing the orifice and allowing liquid to discharge through the stem.

 

 

 

 

NOT A PURCHASIBLE ITEM

(Product Over Veiw Page)

 

 

 

 

 

 

Moisture Minder Pneumatic Filter Drain

Pneumatic Drain

REQUIRES PILOT SIGNAL

A pneumatically actuated drain valve efficiently removes liquids from the filters using an intermittent pilot signal. Water separators, up to 120 CFM, use the filter drain with an internal reservoir (pictured above). Larger units, 225 CFM+, have a head-mounted pneumatic drain valve with an external reservoir.

 

 

 

 

21999-0177 Electronic Drain Valve w shadow

Electronic Drain

REQUIRES ELECTRICITY

Incorporates a solenoid valve and an electric timer with two on/off settings. ON is the setting for the amount of time the valve needs to stay open (0.5 to 10 seconds) and OFF is the time between openings (0.5 to 45 minutes)

 

 

 

 

 

 

 

 

!
!